Industrial Adhesives & Glues
Industrial Adhesives & Glues
-
LOCTITE 401
LOCTITE® 401™ Surface Insensitive Instant Adhesive low / medium viscosity, clear, surface insensitive, one part, room temperature cure, instant adhesive. Designed for OEM assembly of difficult-to-bond materials which require uniform stress distribution. Particularly suited for bonding a wide range of materials, including metals, plastics, and elastomers. Ideal for close fitting applications.
-
LOCTITE 496
Loctite® 496™ Super Bonder® Instant Adhesive is a general purpose cyanoacrylate adhesive and is particularly suited to bonding of metal substrates. Mil Spec: Mil-A-46050C Type I Class II. Commercial Item Description A-A-3097: Type I Class 2.
-
LOCTITE 567
Technical Data
- Maximum pipe size: 3"
- Disassembly strength: Low
- Service temperature range: -50°C - +200°C
- Breakaway torque: 1.7 Nm
- Pack sizes: 6ml, 50ml, 250ml
-
LOCTITE 243
This "Next Generation" threadlocker provides:
- Upgraded temperature resistance - up to 360°F
- Oil tolerant curing on as-received fasteners without cleaning
- Primerless performance on both inactive and active metals
-
LOCTITE 277
LOCTITE® 277™ Large Bolt High Strength Red Threadlocker locks fasteners up to 1 1/2" (36 mm). Protects threads from rust and corrosion. Removable with heat and hand tools. Mil Spec: Mil-S-46163A Type I Grade L. ASTM-D5363: Group 2 Class 1 Grade 1.
-
LOCTITE 577
Thread Sealant - medium strength. General purpose. For overhead applications and fast application at low temperatures. Slow curing.
LOCTITE 577 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings.
-
Loctite 222
Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.
LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass.
-
LOCTITE 572
Your benefits
- Suitable for coarse metal threads
- Ideal where slow cure is required for adjusting the alignment of fittings
-
LOCTITE 542
Thread Sealant - medium strength. For fine threads in hydraulic, pneumatic and general fittings. Fast curing.
LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
-
Loctite 574
Loctite® 574™ Flange Sealant seals close fitting joints between rigid metal faces and flanges. Because it is fast curing, it provides resistance to low pressures immediately after assembly of flanges.
-
Plastic Steel® Putty (A)
Plastic Steel® is the original metal-filled epoxy putty used for hundreds of routine maintenance, production, and tooling applications. Patch and repair areas where welding or brazing would be undesirable or impossible.
-
Devcon 5 Minute® Epoxy
Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds, dries in 15 minutes and reaches functional strength in 1 hour.